EL-50449 Ford TPMS Reset Tool
Notice:The package does not include the charger and battery.
How to use EL-50449?
1.
Set the vehicle to the tire pressure training mode (plug the key in to
ignition switch, step on the parking brake, turn off the key and turn on
for 3 times, one more time step on the parking brake, turn off the car
keys, turn on and off for 3 times; After you do like this, a part of car
models may have flashing emergency lights which means the car enters
into traning mode.If you hear the horn beeps that means the training
mode is enabled.
2. Start with the left front tire, make the
EL-50449 antena faces upwards to contact the tire sidewall near the rim
of the valve stem to start the antena. Press and release the start
buton and wait the horn beeps, at this time the senzor information is
written into the car and the next turn signal will light up to wait you
to written into the car.
3.When
the horn beeps and the right front turn signal light up, start to write
the right front tire senzor information by repeating the step (2), then
is the right rear tire and ends with the left rear tire.
4.
When the left rear senzor is written into car and the horn beeps for 2
times, all the 4 tires' senzor information is written into the car
successfully, and the body control module also exits the reading mode.
Notes:
1.
After use up, please charge about 2 hours, because the new battery low
capacity may result in transit power doesn't meet the standard.
2. EL-50449 contacts the position between the tire near the gas core and the wheel, not the position of the gas core.